Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

News - Events

Automatic door adjustment after installation: Key items to check
05/11/2026
Professional news

Automatic door adjustment after installation: Key items to check

After installation is complete, automatic doors must be inspected and adjusted before being put into operation. Automatic door adjustment helps ensure that all components work in sync, the door leaves move along the correct travel path, sensors detect accurately, and the system operates reliably and safely. So, what does the adjustment process involve, and how […]

What should be checked when assessing automatic doors after years of use?
0311.2026
03/11/2026
Professional news

What should be checked when assessing automatic doors after years of use?

After years of operation, automatic doors may show signs such as irregular opening and closing, unusual noise, or inaccurate sensor responses. However, these symptoms alone are not enough to identify the cause or conclude that the equipment has deteriorated. Therefore, assessing automatic doors after years of use requires an evaluation of the actual condition of […]

What does an automatic door maintenance log reveal about equipment condition?
2910.2026
29/10/2026
Professional news

What does an automatic door maintenance log reveal about equipment condition?

During operation, automatic doors may require inspection, adjustment, or component replacement depending on their actual condition. Assessing a door at a single point in time makes it difficult for facility managers to understand previous issues and how they were addressed. An automatic door maintenance log organizes records of inspections, repairs, and items requiring further monitoring. […]

How to choose an automatic window motor based on size, weight and opening type
2710.2026
27/10/2026
Professional news

How to choose an automatic window motor based on size, weight and opening type

Choosing an automatic window motor involves more than simply considering the window’s dimensions or weight. To ensure stable operation, the motor must also meet requirements for drive force, opening stroke, linkage mechanism, and actual installation conditions. An unsuitable choice may prevent the window from opening to the desired position, result in unstable operation, or place […]

What types of automatic window motors are available? How to choose the right one
2610.2026
26/10/2026
Professional news

What types of automatic window motors are available? How to choose the right one

In automatic window systems, the motor determines the opening and closing mechanism and the window’s operating performance. However, different window types have different structures, dimensions, and usage requirements, so not every motor is suitable for every project. What types of automatic window motors are available, and what criteria should be considered when selecting one? In […]

Automatic door opening and closing cycles: What do 5 million cycles reveal about durability?
2310.2026
23/10/2026
Professional news

Automatic door opening and closing cycles: What do 5 million cycles reveal about durability?

Durability is one of the key criteria when selecting automatic doors for office buildings, shopping malls, hospitals, and other high-traffic facilities. The number of automatic door opening and closing cycles is often cited as an indicator of a system’s operating performance over time. In practice, the NABCO door system at Cha Ca Gia Nguyen recorded […]

How does automatic door opening and closing frequency affect equipment service life?
2110.2026
21/10/2026
Professional news

How does automatic door opening and closing frequency affect equipment service life?

In high-traffic facilities such as shopping malls, hospitals, airports, and office buildings, automatic doors must open and close continuously to meet usage demands. A high automatic door opening and closing frequency can increase wear on motors, rollers, guide rails, and mechanical components. However, the number of opening and closing cycles is not the only factor […]