Feature

GIUNO ULTRA BT A20

Hydraulic operator with 24 V for hinged wings up to 2 m. 300 kg in weight and use very intensive. Manoeuvre time 14 s.

 

♦ Control unit with display: for easy scenario programming. U-Link: full interconnectivity with other devices via Bluetooth, RS-485, TCP/IP.

♦ Selectable block system: the operators can be converted to reversible, with opening block, closing block or double block. All this by simply turning a key.

♦ New magnetic limit switch: together with D-Track technology, offers extreme precision of maneuver and positioning. Double sensor system to define in detail end of the maneuver slowdowns. High reliability against dust, water and ice.

 

 

LINK CATALOGUE

 

Technical data

Control unit

THALIA P

Board power supply

230 V

Motor voltage

24 V

Power input

90 W

Max. width of door/gate wing

2 m

Max. weight of door/gate wing

300 kg

Useful rod stroke

270 mm

Maximum angle

110 °

Cycle time

14 s

Type of limit switch

Magnetic

Slowdown

Yes

Locking

Selectable in opening/closing

Release

Triangle key

Impact reaction

D-Track

Frequency of use

very intensive

Protection rating

IP55

Environmental conditions

-20 ÷ 60 °C

U-Link

no

Reference projects

Related products

ELI BT A40 Underground Swing Gate Operator

An in-ground non-reversible electromechanical operators for swing gates up to 4m long with 24V technology.

Diablo Underground Swing Gate Operator

Underground 24V electro-mechanical operator for swing-leaf gates of a compact size and weight up to 300 kg. It proves less bulky for masonry work and is easier to install.

LETRON L5000/L5500 Swing Gate Operator

Underground Operator 24 V for swing gates up to 400/600 kg in weight, opening speed 9/10 s (90 degrees)

CELMER SA-73 Swing Gate Operator

Operator 24 V for swing gates up to 120 kg in weight, opening speed 9 s (90 degrees)

Swing Gate Operators twist UG

For swing gates with a maximum wing width of 3.5 m and a maximum wing weight of 350 kg. Ideal for swing gates where the operator should not be seen.

Swing Gate Operators twist XL

The super-strength swing gate operator for oversized gates. More is not possible? Yes it is: The twist XL can be used anywhere for right and left stops as well as in 1- and 2-wing operation for wing widths of up to 7 m or wing weights of 1100 kg.

Swing Gate Operators twist 350

The powerful swing gate operator for gates with up to 4 m wing width. Like the twist 200 E and twist 200 EL, the twist 350 can be used anywhere: for gates opening to the left or right, in 1- or 2-leaf operation

Swing Gate Operators twist 200 E

The powerful swing gate operator for gates up to 2.5 m leaf width. With its compact design the twist 200 E can be universally used: for gates opening to the left or right, in 1- or 2-leaf operation

Swing Gate Operators GIUNO ULTRA BT A50

Hydraulic operator with 24 V for hinged wings up to 5 m. 800 kg in weight and use very intensive. Manoeuvre time 20 s

Swing Gate Operators SUB BT

Low voltage, in-ground irreversible hydraulic operator for hinged leaves up to 2.5 m. weight 800 kg.

Swing Gate Operators PHOBOS BT A25

PHOBOS BT A25 Irreversible electromechanical operator 24 V for swing gates weighing up to 400 kg and 2.5 m long.

770N 24V Underground Swing Gate Operator

Underground electro-mechanical operator 24 V for swing gates up to 3.5 m, 500 kg in weight

Telephone Operator 24/7:+84913226008

..........IOS APP
to-top