Feature

SUB BT

Low voltage, in-ground irreversible hydraulic operator for hinged leaves up to 2.5 m. weight 800 kg.

♦ Control unit with programming display and new, simplified scenario-based programming

♦ Fully adjustable mechanical stops inside the operator

♦ The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

 

LINK CATALOGUE

Technical data

Control unit

THALIA P

Board power supply

230 V

Motor voltage

24 V

Power input

300 W

Max. width of door/gate wing

2.5 m

Max. weight of door/gate wing

800 kg

Maximum angle

120 °

Cycle time

13 s

Slowdown

Yes

Locking

Open/close hydraulics

Release

Lever or lever with personalised key

Impact reaction

D-Track

Frequency of use

very intensive

Protection rating

IP67

Environmental conditions

-20 ÷ 60 °C

U-Link

no

Reference projects

Related products

ELI BT A40 Underground Swing Gate Operator

An in-ground non-reversible electromechanical operators for swing gates up to 4m long with 24V technology.

Diablo Underground Swing Gate Operator

Underground 24V electro-mechanical operator for swing-leaf gates of a compact size and weight up to 300 kg. It proves less bulky for masonry work and is easier to install.

LETRON L5000/L5500 Swing Gate Operator

Underground Operator 24 V for swing gates up to 400/600 kg in weight, opening speed 9/10 s (90 degrees)

CELMER SA-73 Swing Gate Operator

Operator 24 V for swing gates up to 120 kg in weight, opening speed 9 s (90 degrees)

Swing Gate Operators twist UG

For swing gates with a maximum wing width of 3.5 m and a maximum wing weight of 350 kg. Ideal for swing gates where the operator should not be seen.

Swing Gate Operators twist XL

The super-strength swing gate operator for oversized gates. More is not possible? Yes it is: The twist XL can be used anywhere for right and left stops as well as in 1- and 2-wing operation for wing widths of up to 7 m or wing weights of 1100 kg.

Swing Gate Operators twist 350

The powerful swing gate operator for gates with up to 4 m wing width. Like the twist 200 E and twist 200 EL, the twist 350 can be used anywhere: for gates opening to the left or right, in 1- or 2-leaf operation

Swing Gate Operators twist 200 E

The powerful swing gate operator for gates up to 2.5 m leaf width. With its compact design the twist 200 E can be universally used: for gates opening to the left or right, in 1- or 2-leaf operation

Swing Gate Operators GIUNO ULTRA BT A20

Hydraulic operator with 24 V for hinged wings up to 2 m. 300 kg in weight and use very intensive. Manoeuvre time 14 s.

Swing Gate Operators GIUNO ULTRA BT A50

Hydraulic operator with 24 V for hinged wings up to 5 m. 800 kg in weight and use very intensive. Manoeuvre time 20 s

Swing Gate Operators PHOBOS BT A25

PHOBOS BT A25 Irreversible electromechanical operator 24 V for swing gates weighing up to 400 kg and 2.5 m long.

770N 24V Underground Swing Gate Operator

Underground electro-mechanical operator 24 V for swing gates up to 3.5 m, 500 kg in weight

Telephone Operator 24/7:+84913226008

..........IOS APP
to-top